| |
|
|
 |
Batching |
|
|
Integrations |
|
|
Material Handling |
|
|
Logic Controls |
|
|
Weighing Systems |
|
|
Counting Systems |
|
|
Data Logging |
|
|
In-motion Weighing |
|
|
Filling Systems |
|
|
PLC Systems |
|
|
Multi station Networking
|
|
| ^Top |
| Networking |
| |
| MODBUS via RS485/RS232 |
Use
RS485/RS232 to create a multi-device network. Establish
master-slave communications among Vision OPLC™
units and any connected device that supports the MODBUS
protocol. Any Vision OPLC™ in the network may
function as either master or salve. |
| |
|
| |
| CANbus Networking |
Integrate
up to 63 units of Vision OPLC™ and
M90/M91 OPLC™ units into an efficient
high-speed network. Use the M90/M91 as a smart remote
I/O. |
| |
| |
| |
| OPC Server / DDE Server via
RS232 |
Use
RS232 to gain PC access to your Vision OPLC™
network. Unitronics OPC/DDE server enables the Vision
OPLC™ to exchange data with any Windows-based
application. |
| ^Top |
|
| |
| Additional Communication
Protocols |
The
“Protocols” FB enables Vision OPLC™ to communicate with
a broad variety of external devices, such as bar-code
readers, printers and servos. |
| |
|
| |
| Ethernet |
| ^Top |
Use
your factory's existing LAN wiring to implement stable,
high-speed control. Ethernet, the universal COM standard,
is now embedded in Vision™
controllers*. Ethernet enables MODBUS commands to run
over TCP/IP. |
| Via
an Ethernet port and easy-to-use Ladder function
blocks, Vision OPLC™s can : |
|
Exchange data, PLC
to PLC |
|
Access external slave devices
that support MODBUS over TCP/IP |
|
Implement PC access via SCADA. |
|
Acquire data from remote Vision
units networked into Internets, and wireless
LANs |
|
Boost your connectivity by using
dedicated IP addresses and access /program remote
Vision PLCs via the Internet |
|
 |
| SMS
Controlls |
| ^Top |
| Remote Control via
GSM |
|
Remote
monitoring : Unitronics’ M90/M91
and Vision OPLC™ Series can send/receive SMS messages
to/from a GSM cell phone in response to any user-defined
event.
Remote trouble-shooting : Receive/send
SMS messages from/to your GSM phone to monitor and modify
set-points or run-time parameters in your system. |
| |
| The
GSM-enabled Vision OPLC™ |
|
Sends and receives
SMS messages containing both fixed text and variable
data |
|
Sends messages to 6-8 different
GSM cell phones |
|
Can route different messages
to different phone numbers |
|
Protects your system : prevents
unauthorized callers |
|
Auto-acknowledges received messages |
|
Answers data requests from your
cell phone |
|
Contains up to 1k of user-defined
messages |
|
| |
|
| Remote
Access |
|
| |
^Top |
| Use
your PC to access remote OPLC™
units, via network connections & GSM/landline
modem |
|
Download, upload,
or debug remote PLC's Ladder programs |
|
Operate the
controller's panel via remote PC |
|
View real-time
parameters |
|
 |
Use Stand-alone
Remote Access software
to : |
|
View and operate
several controllers on your PC screen, simultaneously,
in real-time |
|
Read, write, and store online
operand alues—plus database
values |
|
Run, reset, or initialize a remote
controller |
Remote
Access runs independently of the Ladder software,
and hence protects your program from unauthorized
users. |
|
| ^Top |
| Data
Export |
|
This powerful software utility captures
PLC application data, then exports it to Excel files
for processing.
Data is exported according to a user-defined schedule.
Use the DataXport PC software to : |
| Log
PLC data to Excel according to a date/time-based schedule |
| Simultaneously
log data from one or more Unitronics PLCs, whether networked
or stand-alone |
|
Access PLCs and log data either directly, via network,
or via GSM/landline modem connection |
| Pull
data manually, to view current parameter status |
| |
| OPLC |
| |
| Unitronics’
profound belief in the importance of usability led us
to create an industry first: a PLC provided with an
integrated operator interface.
The result is a new generation of PLCs :
the OPLC™. Our OPLC™
controller series combine Operating Panels & Programmable
Logic Controllers into a single unified device, easy
to program and easy to operate.
The M90/M91 and Vision OPLC™ Series are prime
examples of the OPLC™ philosophy. Our most
recent Vision OPLC™ feature is Ethernet connectivity.
Ethernet enables data exchange--PLC-to-PLC, and PC-to-PLC--over
an enterprise's existing LAN wiring.
The
OPLC™ operating panels contain a display screen
& keyboard. The display screen is used to display
messages, so that the PLC can communicate with the operator
overseeing the automated process. The keyboard is used
to enter information into the system & to initiate
functions, so that the operator can communicate with
the PLC running the automated process. Unitronics’ offers
a full line of OPLC™ devices,
devices that can handle any automated process. Great
ideas always seem so simple...after the fact. |
 |
| |
^Top |
| The
M90/M91 |
|
| |
|
What
is the M90/M91 ?
The
M90/M91OPLC™ is an innovative micro-PLC
(Programmable Logic Controller) with a built-in operating
panel that contains an LCD display screen and full numeric
keypad for easy man-machine communication. The screen
displays user-defined operator instructions and dynamic
system data. The operator uses the programmable keypad
to enter data into the system and to initiate functions.
The M90/M91-GSM can send and receive SMS messages,
allowing you to monitor and control M90/M91-automated
systems using your GSM cell phone, without having to
approach the machine. |
 |
| |
What are its advantages?
User-Friendly
Operator Interface |
Unlike
traditional ‘blind’ PLCs, the M90/M91 enables the
operator to easily change program parameters via the
HMI operating panel. The numeric keypad can
be used to enter and modify variable application data--such
as cutting length, timers, production quantities &
part numbers.
The LCD screen display can be used to monitor I/O
status, timers, communication status, analog input
and counter values.
|
 |
| A
Model to Suit Any Application |
^Top |
|
Unitronics produces the M90/M91 in
12 models encompassing a variety of features: digital/analog/temperature
measurement onboard I/Os, shaft-encoders and high-speed
I/Os, CANbus/RS232/485 communications, real-time/date
control, and the ability to hook up to 8 I/O expansion
modules to a single M90/M91 controller. |
 |
| |
| Easy
Programming |
U90
Ladder software provides a Windows environment for the
creation of both the PLC Ladder control program, and
the HMI operator interface. This saves you the time
and effort of programming the HMI and PLC in 2 separate
environments. |
| |
| The
All-In-One Package |
The
complete M90/M91 package includes the M90/M91, U90 Ladder
software, program download cable, mounting hardware,
and manual. |
| |
| Vision
Series |
| |
^Top |
| What is the
Vision Series? |
The
Vision Series is an
innovative series of PLCs (Programmable Logic
Controller) with built-in graphical operating
panel or touch-panel, on-board or snap-in I/Os
and powerful networking features.
|
| |
The Vision series includes
the Vision10™ , Vision230™, Vision260™
, Vision280™ and Vision290™ OPLC™s.
|
| |
A
Vision PLC contains a graphical
LCD screen or graphical LCD touchscreen (model
dependent), and full numeric keypad (a virtual
keyboard in V290) for easy man-machine communication.
The screen displays user-defined operator instructions
and dynamic system data. The operator uses the
programmable keypad, the “touchable” images/texts
and the virtual keyboard to enter data into
the system and to initiate functions. |
| |
| What
are its advantages? |
User-Friendly Operator Interface |
Unlike
traditional ‘blind’ PLCs, a Vision
PLC enables the operator to easily change program
parameters via the HMI operating panel. The
numeric keypad can be used to enter and modify
variable application data--such as cutting length,
timers, production quantities & part numbers.
The LCD screen display can be used to graphically
monitor I/O status, timers, communication status,
analog input and counter values.
|
| |
| A
Configuration to Suit Any Application |
| Advanced features
and communication options |
All
Vision models include
8 independent PID loops, a 120K smart database
and other features that reduce hardware and
save time. Communication options include Ethernet,
GSM/SMS support, MODBUS (Master/Slave), modem
access and easy access to external devices such
as servos, printers, SCADA systems and bar-code
readers.
|
| |
| Easy Programming |
| The Vision Package |
The
complete Vision package
includes one OPLC™, the VisiLogic™
Ladder software, a program download cable, mounting
hardware, and a printed user guide. |
| |
| Applications |
| |
| Perfect
small machine control for any application |
|
Barrier
control |
|
Compressors |
|
Press Control |
|
Pump management |
|
Security systems |
|
Conveyor belts |
|
Oven Control |
|
Time-controlled lighting |
|
Control via GSM |
|
Building &
environment control |
|
Irrigation |
|
Packaging |
| |
|
Data
Collections
PID Loop
HMI |
|
 |
| ^Top |
 |
 |
